Email this article 
How to Calculate and Design Shell and Tube-type Heat Exchanger with a Single Heat Transfer
), Asep Bayu Dani Nandiyanto(2),
(1) Universitas Pendidikan Indonesia
(2) Universitas Pendidikan Indonesia
Corresponding Author
Abstract
Keywords
References
Abd, A. A., Kareem, M. Q., and Naji, S. Z. (2018). Performance analysis of shell and tube heat exchanger: Parametric study. Case studies in Thermal Engineering, 12, 563-568.
Abdelkader, B. A., and Zubair, S. M. (2019). The effect of a number of baffles on the performance of shell-and-tube heat exchangers. Heat Transfer Engineering, 40(1-2), 39-52.
Abolpour, B., Hekmatkhah, R., and Shamsoddini, R. (2021). Multi-objective optimum design for double baffle heat exchangers. Thermal Science and Engineering Progress, 26, 101132.
Aresti, L., Christodoulides, P., and Florides, G. (2018). A review of the design aspects of ground heat exchangers. Renewable and Sustainable Energy Reviews, 92, 757-773.
Bahiraei, M., Naseri, M., and Monavari, A. (2021). A CFD study on thermohydraulic characteristics of a nanofluid in a shell-and-tube heat exchanger fitted with new unilateral ladder type helical baffles. International Communications in Heat and Mass Transfer, 124, 105248.
Boulougouras, P., and Besseris, G. (2023). Lean-and-green strength performance optimization of a tube-to-tubesheet joint for a shell-and-tube heat exchanger using taguchi methods and random forests. Processes, 11(4), 1211.
Costa, A. L., and Queiroz, E. M. (2008). Design optimization of shell-and-tube heat exchangers. Applied Thermal Engineering, 28(14-15), 1798-1805.
Douadi, O., Ravi, R., Faqir, M., and Essadiqi, E. (2022). A conceptual framework for waste heat recovery from compression ignition engines: Technologies, working fluids & heat exchangers. Energy Conversion and Management: X, 16, 100309.
Gupta, S. K., Verma, H., and Yadav, N. (2022). A review on recent development of nanofluid utilization in shell & tube heat exchanger for saving of energy. Materials Today: Proceedings, 54, 579-589.
Gürses, D., Mehta, P., Sait, S. M., and Yildiz, A. R. (2022). African vultures optimization algorithm for optimization of shell and tube heat exchangers. Materials Testing, 64(8), 1234-1241.
Harris, C., Kelly, K., Wang, T., McCandless, A., and Motakef, S. (2002). Fabrication, modeling, and testing of micro-cross-flow heat exchangers. Journal of Microelectromechanical Systems, 11(6), 726-735.
Kallannavar, S., Mashyal, S., and Rajangale, M. (2020). Effect of tube layout on the performance of shell and tube heat exchangers. Materials Today: Proceedings, 27, 263-267.
Kücük, H., Ünverdi, M., and Yılmaz, M. S. (2019). Experimental investigation of shell side heat transfer and pressure drop in a mini-channel shell and tube heat exchanger. International Journal of Heat and Mass Transfer, 143, 118493.
Li, J., Yang, Z., Hu, S., Yang, F., and Duan, Y. (2020). Effects of shell-and-tube heat exchanger arranged forms on the thermo-economic performance of organic Rankine cycle systems using hydrocarbons. Energy Conversion and Management, 203, 112248.
Mohammadi, M. H., Abbasi, H. R., Yavarinasab, A., and Pourrahmani, H. (2020). Thermal optimization of shell and tube heat exchanger using porous baffles. Applied Thermal Engineering, 170, 115005.
Muthukrishnan, S., Krishnaswamy, H., Thanikodi, S., Sundaresan, D., and Venkatraman, V. (2020). Support vector machine for modelling and simulation of Heat exchangers. Thermal Science, 24(1 Part B), 499-503.
Patel, A. (2023). Advancements in heat exchanger design for waste heat recovery in industrial processes. World Journal of Advanced Research and Reviews (WJARR), 19(03), 137-52.
Pordanjani, A. H., Aghakhani, S., Afrand, M., Mahmoudi, B., Mahian, O., and Wongwises, S. (2019). An updated review on application of nanofluids in heat exchangers for saving energy. Energy Conversion and Management, 198, 111886.
Saeid, N. H., and Seetharamu, K. N. (2006). Finite element analysis for co‐current and counter‐current parallel flow three‐fluid heat exchanger. International Journal of Numerical Methods for Heat & Fluid Flow, 16(3), 324-337.
Saffarian, M. R., Fazelpour, F., and Sham, M. (2019). Numerical study of shell and tube heat exchanger with different cross-section tubes and combined tubes. International Journal of Energy and Environmental Engineering, 10, 33-46.
Saffiudeen, M. F., Mohammed, F. T., and Syed, A. (2020). A case study on procedure standardization of heat exchanger retubing in KSA oil and gas industries. Journal of Failure Analysis and Prevention, 20(5), 1451-1455.
Silaipillayarputhur, K., and Khurshid, H. (2019). The design of shell and tube heat exchangers–A review. International Journal of Mechanical and Production Engineering Research and Development, 9(1), 87-102.
Singh, D., Singh, A., and Yadav, M. K. (2019). Design the Shell and Tube Heat Exchanger with the help of Programming using MATLAB software. International Research Journal of Engineering and Technology, 6, 942-948.
Thanikodi, S., Singaravelu, D. K., Devarajan, C., Venkatraman, V., and Rathinavelu, V. (2020). Teaching learning optimization and neural network for the effective prediction of heat transfer rates in tube heat exchangers. Thermal Science, 24(1 Part B), 575-581.
Vasiliev, L. L. (2005). Heat pipes in modern heat exchangers. Applied thermal engineering, 25(1), 1-19.
Yang, Z., Ma, Y., Zhang, N., and Smith, R. (2020). Design optimization of shell and tube heat exchangers sizing with heat transfer enhancement. Computers & Chemical Engineering, 137, 106821.
Article Metrics
Abstract View
: 961 times
Download : 3142 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Bumi Publikasi Nusantara
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
