Email this article 
Integrated Experimental, Statistical, and Finite Element Analysis of Nanoparticle-Reinforced Polymer Composites for Advanced Structural Applications Completed with Bibliometric Analysis
), Abdul-Rasool Kareem Jweri(2), Ehsan Sabah Al-Ameen(3), Ahmed Ali Farhan Ogai-li(4), Emad Kadum Njim(5), Firas Thair Al-Maliky(6), Alaa Abdulhady Jaber(7), Luttfi A. Al-Haddad(8), Mustafa I. Al-Karkhi(9),
(1) Mustansiriyah University
(2) University of Baghdad
(3) Mustansiriyah University
(4) Mustansiriyah University
(5) Ministry of Industry and Minerals
(6) Al-Mustaqbal University
(7) University of Technology-Iraq
(8) University of Technology-Iraq
(9) Warsaw University of Technology
Corresponding Author
Abstract
Keywords
References
Alaaeddin, M. H., Sapuan, S. M., Zuhri, M. Y. M., Zainudin, E. S., and Al-Oqla, F. M. (2019). Physical and mechanical properties of polyvinylidene fluoride–short sugar palm fiber nanocomposites. Journal of Cleaner Production, 235, 473–482.
Al-Ameen, E. S., Abdulla, F. A., and Ogaili, A. A. F. (2020). Effect of nano TiO₂ on fracture toughness of fiberglass/epoxy in hot climates. IOP Conference Series: Materials Science and Engineering, 870, 012170.
Al-Ameen, E. S., Al-Sabbagh, M. N. M., Ogaili, A. A. F., and Hassan, A. K. (2022). Role of pre-stressing on anti-penetration properties of Kevlar/epoxy plates. International Journal of Nanoelectronics and Materials, 15, 293–302.
Bidsorkhi, H. C., D’Aloia, A. G., De Bellis, G., Proietti, A., Rinaldi, A., Fortunato, M., Ballirano, P., Bracciale, M. P., Santarelli, M. L., and Sarto, M. S. (2017). Nucleation effect of unmodified graphene nanoplatelets on PVDF/GNP film composites. Materials Today Communications, 11, 163–173.
Fu, S., Sun, Z., Huang, P., Li, Y., and Hu, N. (2019). Some basic aspects of polymer nanocomposites: A critical review. Nano Materials Science, 1, 2–30.
Hamdan, Z. K., Ogaili, A. A. F., Jebur, N. A., Abdulla, F. A., Al-Ameen, E. S., and Meteab, Z. W. (2024). Waste eggshell and sawdust as reinforcements for sustainable polyester composites. Jurnal Teknologi (Sciences and Engineering). 87(1), 73-88.
Hosur, M., Mahdi, T. H., Islam, M. E., and Jeelani, S. (2017). Mechanical and viscoelastic properties of epoxy nanocomposites reinforced with carbon nanotubes, nanoclay, and binary nanoparticles. Journal of Reinforced Plastics and Composites, 36, 667–684.
Janićijević, A., Filipović, S., Sknepnek, A., Salević-Jelić, A., Jančić-Heinemann, R., Petrović, M., Petronijević, I., Stamenović, M., Živković, P., and Potkonjak, N. (2024). Structural, mechanical, and barrier properties of polyvinylidene fluoride–bacterial nanocellulose hybrid composite. Polymers, 16, 1033.
Jweri, A.-R. K., Al-Haddad, L. A., Ogaili, A. A. F., Jaber, A. A., and Al-Karkhi, M. I. (2025). Edge-intelligent leak detection using CatBoost. Clean Energy Science and Technology, 3, 398.
Koç, M., Dönmez, Ç. E. D., Paralı, L., Sarı, A., and Aktürk, S. (2022). Piezoelectric and magnetoelectric evaluations on PVDF/CoFe₂O₄ nanogenerators for energy harvesting applications. Journal of Materials Science: Materials in Electronics, 33, 8048–8064.
Kong, X., Wang, Q.-Z., Wang, Y.-F., Huo, H.-M., Kou, F.-Q., Zhang, S.-B., Zhao, J., Zhang, D., Hao, L., and Chang, Y.-J. (2025). Synergistic manipulation of PVDF membrane structure via in-situ esterification for anti-fouling membranes. Journal of Membrane Science, 715, 123474.
Ma, P.-C., Siddiqui, N. A., Marom, G., and Kim, J.-K. (2010). Dispersion and functionalization of carbon nanotubes for polymer nanocomposites. Composites Part A: Applied Science and Manufacturing, 41, 1345–1367.
Mahdi, N. M., Jassim, A. H., Abulqasim, S. A., Basem, A., Ogaili, A. A. F., and Al-Haddad, L. A. (2024). Leak detection using ANN in water distribution systems. Desalination and Water Treatment, 320, 100685.
Mathew, S., Jan, H., and Prasad, V. (2023). Conduction mechanism in PVDF/graphene oxide composites. Physica B: Condensed Matter, 666, 415116.
Mejbel, B. G., Sarow, S. A., Al-Sharify, M. T., Al-Haddad, L. A., and Ogaili, A. A. F. (2024). Data fusion and random forest for machinery failure diagnosis. Journal of Failure Analysis and Prevention, 24(6), 2979-2989.
Metteb, Z. W., Ogaili, A. A. F., Mohammed, K. A., Alsayah, A. M., Hamzah, M. N., Al-Sharify, Z. T., Jaber, A. A., and Njim, E. K. (2025). Optimization of hybrid core designs in 3D-printed PLA+ sandwich structures. Indonesian Journal of Science and Technology, 10, 207–236.
Mohammed, K. A., Al-Sabbagh, M. N. M., Ogaili, A. A. F., and Al-Ameen, E. S. (2020). Experimental analysis of hot machining parameters in crankshaft finishing. Journal of Mechanical Engineering Research and Developments, 43, 105–114.
Mohammed, K. A., Ogaili, A. A. F., Taha, A. W. A., and Alsayah, A. M. (2025). Evaluating spot welds via mechanical testing and finite element modeling. Applied Engineering Letters, 10, 77–89.
Mubarokah, S. L., Anwar, S., Nisa, K., Miftah, H., Hastuti, A., and Nandiyanto, A. B. D. (2024). Bibliometrics study on agro-economy of biochar. Journal of Engineering Science and Technology, 19, 142-152.
Kumar, N. C., Prabhakar, M. N., and Jung-il, S. (2022). PVDF green nanofibers as potential carriers for improving self-healing and mechanical properties of carbon fiber/epoxy prepregs. Nanotechnology Reviews, 11, 1890–1900.
Nandiyanto, A. B. D., Ragadhita, R., Al Husaeni, D. N., and Nugraha, W. C. (2023). Research trend on the use of mercury in gold mining: Literature review and bibliometric analysis. Moroccan Journal of Chemistry, 11(1), 1-19.
Nandiyanto, A. B. D., Syazwany, A. N., Syarafah, K. N., Syuhada, T. S., Ragadhita, R., Piantari, E., Farobie, O., and Bilad, M. R. (2024). Utilization of bamboo powder in the production of non-asbestos brake pads: Computational bibliometric literature review analysis and experiments to support sustainable development goals (SDGs). Automotive Experiences, 7(1), 111-131.
Nassir, L. M., Ramadhan, A. J., Al-Sharify, N. T., Khalaf, M. I., Ogaili, A. A. F., Jaber, A. A., and Al-Sharify, Z. T. (2025). Robust multi-state EEG cognitive classification with CatBoost. International Journal of Robotics and Control Systems, 5, 968–989.
Ndeh, N. T., Sairiam, S., and Nuisin, R. (2024). Graphene oxide-chitosan coated PVDF adsorptive microfiltration membrane: Enhancing dye removal and antifouling properties. International Journal of Biological Macromolecules, 282, 137005.
N'diaye, A. D., Kankou, M. S. A., Hammouti, B., Nandiyanto, A. B. D., and Al Husaeni, D. F. (2022). A review of biomaterial as an adsorbent: From the bibliometric literature review, the definition of dyes and adsorbent, the adsorption phenomena and isotherm models, factors affecting the adsorption process, to the use of typha species waste as adsorbent. Communications in Science and Technology, 7(2), 140-153.
Nivedhitha, D. M., and Jeyanthi, S. (2023). Polyvinylidene fluoride: An advanced futuristic smart polymer material—A comprehensive review. Polymer Advanced Technologies, 34, 474–505.
Ogaili, A. A. F., Al-Ameen, E. S., Kadhim, M. S., and Mustafa, M. N. (2020). Evaluation of mechanical and electrical properties of GFRP composite strengthened with hybrid nanomaterial fillers. AIMS Materials Science, 7, 93–102.
Ogaili, A. A. F., Basem, A., Kadhim, M. S., Al-Sharify, Z. T., Jaber, A. A., Njim, E. K., Al-Haddad, L. A., Hamzah, M. N., and Al-Ameen, E. S. (2024). Effect of chopped carbon fibers on 3D-printed PLA parts. Journal of Composites Science, 8, 273.
Ragadhita, R., and Nandiyanto, A. B. D. (2024). A bibliometric analysis of materials engineering education: Trends and their implications for research and education. ASEAN Journal of Educational Research and Technology, 3(3), 327-344.
Saha, A., Chakraborty, T., Saha, S., Dutta, S., Kundu, T., Mukherjee, S., Das, S., and Sutradhar, S. (2025). Superior EMI shielding behaviour of multi-layer PVDF laminated nanocomposites with W-type hexaferrite fillers. Materials Research Bulletin, 183, 113210.
Saha, S., Yauvana, V., Chakraborty, S., and Sanyal, D. (2019). Synthesis and characterization of PVDF nanofiber for piezoelectric sensors. Materials Today: Proceedings, 18, 1450–1458.
Sarow, S. A., Flayyih, H. A., Bazerkan, M., Al-Haddad, L. A., Al-Sharify, Z. T., and Ogaili, A. A. F. (2024). XGBoost prediction of water yield in solar stills. Discover Sustainability, 5, 510.
Saxena, P., and Shukla, P. (2021). A comprehensive review on properties and applications of poly(vinylidene fluoride). Advanced Composites and Hybrid Materials, 4, 8–26.
Sriyanti, I., Dani, R., Almafie, M. R., Partan, R. U., Idjan, M. K. N. A., and Marlina, L. (2024a). Optimization of diameter and mechanical properties of polyacrylonitrile/polyvinylidene fluoride/graphene oxide coconut shell composite nanofiber mats using response surface methodology. Case Studies in Chemical and Environmental Engineering, 10, 101030.
Sriyanti, I., Ramadhani, R. F., Almafie, M. R., Idjan, M. K. N. A., Syafri, E., Solihah, I., Sanjaya, M. R., Jauhari, J., and Fudholi, A. (2024b). Physicochemical and mechanical properties of polyvinylidene fluoride nanofiber membranes. Case Studies in Chemical and Environmental Engineering, 9, 100588.
Vicente, J., Costa, P., Lanceros-Mendez, S., Abete, J. M., and Iturrospe, A. (2019). Electromechanical properties of PVDF-based polymers reinforced with nanocarbonaceous fillers for pressure sensing applications. Materials, 12, 3545.
Winey, K. I., and Vaia, R. A. (2007). Polymer nanocomposites. MRS Bulletin, 32, 314–322.
Yangzhou, Z., Weifeng, Y., Chaoyang, Z., Bin, G., and Ning, H. (2018). Piezoelectricity of nano-SiO₂/PVDF composite film. Materials Research Express, 5, 105506.
Yi, G., Li, J., Henderson, L. C., Lei, W., Du, L., and Zhao, S. (2022). Enhancing thermal conductivity of polyvinylidene fluoride composites by carbon fiber: Length effect of the filler. Polymers, 14, 4599.
Zheng, J., Zhou, X., Wang, B., Dai, F., and Liu, J. (2024). Modified PVDF/PMMA/SiO₂ composite nanofibrous membrane in airborne filtration: Transparency, mechanical properties and filtration performance. Journal of Environmental Chemical Engineering, 12, 114109.
Article Metrics
Abstract View
: 0 times
Download : 0 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Bumi Publikasi Nusantara
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
